WALL-MOUNTED MOP HOLDER

PRODUCT FEATURES : 
No need to drill holes; waterproof and easy to hold mops, brooms, toilet brushes, etc. Large load-bearing capacity; easy to take away.

HOW TO USE : 
1. Thoroughly clean and dry the contact surface; if needed, use alcohol to clean dirty glass or ceramic surface and dry it before sticking.
2. After removing the outer film, stick the traceless sheet on the target position and pull out the holder from the slot, from left to right.
3. Use your hand to exhaust the air from the middle outward to make the traceless sheet completely firm.
4. Align the holder with the slot and install it from right to left; hang articles only after 24 hours of installation.

APPLICABLE TO
smooth hard surfaces without bumps, such as
wooden surfaces. mere suraces, stainless steel surfaces, plastic surfaces, ceramic surfaces, glass surtaces, erc

NOT APPLICABLE TO
Earth wall, wallpaper, wet surfaces, ageing surfaces, uneven surfaces, rough surfaces, porous surfaces, etc.

CAUTION :
1. Do not use the product near gas stoves, stoves or other high-temperature places.
2. Do not hold valuables such as antiques or fragile items. Do not overload.
3. If the contact surface is wet, oily, dirty, or wax-coated, wipe it off with alcohol and let it dry before sticking (especially there are generally oil stains on the files and glass in the kitchen);
4. When the temperature is lower than 10°C, use a hair dryer to slightly heat the surface before  sticking.
5. Avoid exposing the product to direct sunlight; stop use if its material changes abnormally or it
6. Do not stick the holder over seats, the bed or valuables, so as to prevent it from falling off due
to improper use and avoid danger.
7. It is recommended to stick the holder on the correct position at a stroke; do not paste it repeatedly. Leave the product on the wall for at least 24 hours before use for better effect.
8. When sticking, please press the holder against the surface firmly for a while for better result.